DIY Barn Wood Picture Frames: Add Rustic Charm to Your Home

Instructions:

Step 1: Cut the Barn Wood

Start by measuring and cutting your reclaimed barn wood into four pieces. These pieces will form the sides of your frame. The lengths of the pieces will depend on the size of the photo you want to frame. Typically, you’ll want two longer pieces for the top and bottom and two shorter pieces for the sides.

Tip: Use a miter saw to cut the ends at a 45-degree angle for a more professional look and a perfect fit at the corners.

Step 2: Sand the Edges (Optional)

If your barn wood is very rough, lightly sand the edges to smooth out any splinters or sharp points. Be careful to preserve the natural, weathered look of the wood.

Step 3: Glue the Corners

Apply a thin layer of wood glue to the angled ends of each piece. Carefully align the corners and press them together to form a rectangular frame. Use clamps to hold the corners tightly while the glue dries. Allow the glue to set according to the manufacturer’s instructions, usually for several hours or overnight.

Tip: Wipe away any excess glue with a damp cloth before it dries to keep your frame looking clean.

Step 4: Attach Picture Frame Hardware

Once the glue is completely dry and the frame feels sturdy, it’s time to attach the picture frame hardware.

1. Attach sawtooth hangers to the top center of the back of the frame for easy wall mounting.
2. If you prefer a more secure hold, you can also use corner brackets on the back of the frame for added stability.
3. If you want the option to stand the frame on a tabletop, consider attaching an easel back.

Tip: Make sure to measure and mark the placement of the hardware to ensure your frame hangs straight.

Step 5: Insert Your Photo

Finally, it’s time to insert your favorite country-themed photo. You can secure the photo in place with small brads, tabs, or by adding a backing board and securing it with clips. If you’re using glass or acrylic to cover the photo, make sure it fits snugly inside the frame.